Search Products
- 1£315.00
Axis PNG 1010 front wing + cover1 × £315.00- Subtotal: £315.00
- View Cart Checkout
Shop
Showing 65–80 of 553 results
-
Used to connect your 19mm Axis Mast to your Fuselage. AKA “Doodad”
-
The Fireball range is proven to deliver results with its high-lift/low drag section, with outlines featuring aspect ratio 13 and ultra high modulus carbon constructions, offering you better stability across a broad and higher speed range than ever before.
From firing conditions in waves to channel crossings, the Fireball range has got you covered!
Coming complete with a cover to protect your foil against the elements its faces off the water.
Select options This product has multiple variants. The options may be chosen on the product page -
Designed for the AXIS S-Series, K-Series Foils and Black-Series Foils.
The AXIS masts are stiff, strong, and ready for any use and conditions.Select options This product has multiple variants. The options may be chosen on the product page -
This wingboard has some damage to the tail (repaired with Dr Ding) otherwise in good condition – perfect starter board, very stable, easy to ride, has strap positions – an epoxy carbon construction. The Axis Froth 6’0 – its length makes it easy to get going.
-
The High Performance Speed (HPS) wings are FAST. Designed for the ultimate in performance, but yet still usable by most levels of riders.
Included is an AXIS padded cover with zipper, in heather gray, and AXIS branding, for safer setup, transportation and storage.
*If you purchase a Black Series front wing it will only fit on a Black Series fuselage as the bolt pattern is spaced differently and the fuselage is thinner to accommodate the high aspect wings.
Select options This product has multiple variants. The options may be chosen on the product page -
Axis PNG 1010 front wing (1430 sqcm/Aspect Ratio 7.13) – the front wing has no repairs – it does have scratches and a small ding along trailing edge which can easily be rectified with filling and sanding.
Comes complete with cover -
Pump and glide. Re-defined.
The Axis PNG v2 offers better acceleration, speed and turning capabilities combined with decreased drag and lower stall speeds when compared to its predecessor.
Coming complete with a cover to protect your foil against the elements its faces off the water.
Select options This product has multiple variants. The options may be chosen on the product page -
We are pretty excited about the new carbon mast range from Axis – we have been reliably told that the new masts are super stiff, in-fact any carbon mast that is stiffer than the Axis alloy mast is really saying something.
The new Axis Power Carbon foil mast is 22% stiffer than the Axis 19mm Aluminium mast!
Select options This product has multiple variants. The options may be chosen on the product page -
We are pretty excited about the new carbon mast range from Axis – we have been reliably told that the new masts are super stiff, in-fact any carbon mast that is stiffer than the Axis alloy mast is really saying something.
The new Axis Power Carbon High Modulus foil mast is 35% stiffer than the Axis 19mm Aluminium mast!
Select options This product has multiple variants. The options may be chosen on the product page -
55% Stiffer than an Aluminium mast
The big development in the new Ultra HM Pro carbon mast is its new construction from military grade carbon so it is stiffer than the current HM mast but the big difference is its shape. The mast has been refined in its profile as the mast nears the join to the fuse the profile which generally sits under water is now a thinner and narrower cord (12.5mm reduction in chord size) and this results in a 20% less drag over the current HM mast.
This product is in very limited supply so at the moment its on a preorder basis only – order now, receive mid December!
Select options This product has multiple variants. The options may be chosen on the product page -
With five distinct ranges to cover all foiling disciplines, you can be sure Axis has the perfect rear wing for you. As a rule of thumb, smaller rear wings will loosen up your set up for tight carving, but will also reduce stability and pumpability.
*Included is an AXIS padded cover with zipper and AXIS branding, for safer setup, transportation and storage.
Select options This product has multiple variants. The options may be chosen on the product page -
With five distinct ranges to cover all foiling disciplines, you can be sure Axis has the perfect rear wing for you. As a rule of thumb, smaller rear wings will loosen up your set up for tight carving, but will also reduce stability and pumpability.
*Included is an AXIS padded cover with zipper, in heather grey, and AXIS branding, for safer setup, transportation and storage.
Select options This product has multiple variants. The options may be chosen on the product page -
With five distinct ranges to cover all foiling disciplines, you can be sure Axis has the perfect rear wing for you. As a rule of thumb, smaller rear wings will loosen up your set up for tight carving, but will also reduce stability and pumpability.
*Included is an AXIS padded cover with zipper, in heather grey, and AXIS branding, for safer setup, transportation and storage.
Select options This product has multiple variants. The options may be chosen on the product page -
With five distinct ranges to cover all foiling disciplines, you can be sure Axis has the perfect rear wing for you. As a rule of thumb, smaller rear wings will loosen up your set up for tight carving, but will also reduce stability and pumpability.
*Included is an AXIS padded cover with zipper, in heather grey, and AXIS branding, for safer setup, transportation and storage.
Select options This product has multiple variants. The options may be chosen on the product page -
If you’re into pushing the envelope in Prone, SUP, Wake, Wing or Pump, these will blow your mind. Are you looking to push harder, carve tighter turns and want an even more connected feeling on the larger PNG and BSC front wings? Our new Red Advance fuselage is for you.
In three different sizes you get tons of options to fine tune your setup. This design sees the mast position moved 40mm closer to the front foil, opening up entirely new options for performance.
Select options This product has multiple variants. The options may be chosen on the product page -
The AXIS Foil Plate mount is made with high grade Aluminium, 3d CNCed and anodized. This is not your off the shelf plate mount. This is a beautifully engineered and very stiff piece, designed to hold the mast of your foil tightly and strongly. Multiple holes give you flexibility with positioning on your foil board. And the sliding endings, let you remove the plate by just loosening the screws, w/out having to fully unscrew the M8 bolts from your board.
Showing 65–80 of 553 results